Want to try first custom
Page 1 of 2 • Share •
Page 1 of 2 • 1, 2 
Want to try first custom
So not very good artist but wanted to paint one of my squadts. Do you guys know any good tips for prepping painting them?

Skullyton85- CAD Born Again Hard
- Posts: 375
Join date: 2012-04-29
Age: 27
Location: Cali
Re: Want to try first custom
make sure you prime and seal the paint. other than that, anything is game. good luck!

Gatiio- COLLECTOR-DESTOYER
- Posts: 2776
Join date: 2011-10-12
Age: 27
Location: Chicago

Re: Want to try first custom
Skullyton85 wrote:So not very good artist but wanted to paint one of my squadts. Do you guys know any good tips for prepping painting them?
In the same boat lol.

ilovefreestufftoo- CAD Animal Mother
- Posts: 2393
Join date: 2012-05-13
Location: So Calif
Re: Want to try first custom
D you need to strip anything off first? I really don't want to screw up a perfectly good squadt. I just want to paint my gassed squadt flat black

Skullyton85- CAD Born Again Hard
- Posts: 375
Join date: 2012-04-29
Age: 27
Location: Cali
Re: Want to try first custom
Skullyton85 wrote:D you need to strip anything off first? I really don't want to screw up a perfectly good squadt. I just want to paint my gassed squadt flat black
Take the body apart. then tape of the joints. Use testors spraypaints. I found those to work the best. Patients is a must let it dry completely before you touch it. With squadts you really dont need to prime

manny- CAD Too Buku
- Posts: 885
Join date: 2010-06-14
Re: Want to try first custom
I have no idea about Squadt.
But for dunnys, primer makes differences.
But for dunnys, primer makes differences.

henry17s- CAD Grunt
- Posts: 158
Join date: 2011-10-13
Re: Want to try first custom
This all depends on what paint you use and the condition of the Squadt you are painting.
Will just explain how I did it, YMMV.
Stripped all painted parts with Acetone. Washed thoroughly afterward. Once clean, do not touch the parts with your bare hands. Used Monster Kolor spray can silver right on the bare vinyl. Worked fantastically. No matter how hard I have tried have not been able to pull the paint off the vinyl.
If you are using other brands of paint then the best thing is to experiment and see what works best. Rustoleum primer is the bomb on vinyl, and it is a good idea to prime with most paints.
HTH.
Will just explain how I did it, YMMV.
Stripped all painted parts with Acetone. Washed thoroughly afterward. Once clean, do not touch the parts with your bare hands. Used Monster Kolor spray can silver right on the bare vinyl. Worked fantastically. No matter how hard I have tried have not been able to pull the paint off the vinyl.
If you are using other brands of paint then the best thing is to experiment and see what works best. Rustoleum primer is the bomb on vinyl, and it is a good idea to prime with most paints.
HTH.

gregm- CAD Too Buku
- Posts: 1218
Join date: 2010-08-24
Age: 41
Location: Grayson, GA
Re: Want to try first custom
gregm wrote:This all depends on what paint you use and the condition of the Squadt you are painting.
Will just explain how I did it, YMMV.
Stripped all painted parts with Acetone. Washed thoroughly afterward. Once clean, do not touch the parts with your bare hands. Used Monster Kolor spray can silver right on the bare vinyl. Worked fantastically. No matter how hard I have tried have not been able to pull the paint off the vinyl.
If you are using other brands of paint then the best thing is to experiment and see what works best. Rustoleum primer is the bomb on vinyl, and it is a good idea to prime with most paints.
HTH.![]()
Sweet thanks for the info!! I'm still nervous about trying it but I'll be sure and post pics if I do!!

Skullyton85- CAD Born Again Hard
- Posts: 375
Join date: 2012-04-29
Age: 27
Location: Cali
Re: Want to try first custom
Skullyton85 wrote:Sweet thanks for the info!! I'm still nervous about trying it but I'll be sure and post pics if I do!!
Either pick up a NKD Nozzel just for this or grab something like a munny to practice on first.
I wouldn't paint any of my Squadts that weren't specifically for customs!

gregm- CAD Too Buku
- Posts: 1218
Join date: 2010-08-24
Age: 41
Location: Grayson, GA
Re: Want to try first custom
gregm wrote:Skullyton85 wrote:Sweet thanks for the info!! I'm still nervous about trying it but I'll be sure and post pics if I do!!
Either pick up a NKD Nozzel just for this or grab something like a munny to practice on first.
I wouldn't paint any of my Squadts that weren't specifically for customs!
I agree with this, Everytime I see a custom squadt that isn't a Jack or Nozzel I think, that makes it that much harder for someone to get that one. Retail or not they don't make many of these.

Crunch- CAD Special Forces
- Posts: 582
Join date: 2011-12-27
Age: 28
Location: Phoenix
Re: Want to try first custom
Crunch wrote:gregm wrote:Skullyton85 wrote:Sweet thanks for the info!! I'm still nervous about trying it but I'll be sure and post pics if I do!!
Either pick up a NKD Nozzel just for this or grab something like a munny to practice on first.
I wouldn't paint any of my Squadts that weren't specifically for customs!
I agree with this, Everytime I see a custom squadt that isn't a Jack or Nozzel I think, that makes it that much harder for someone to get that one. Retail or not they don't make many of these.
Guess I better not post any of the other customs I have in the works.

gregm- CAD Too Buku
- Posts: 1218
Join date: 2010-08-24
Age: 41
Location: Grayson, GA
Re: Want to try first custom
gregm wrote:Crunch wrote:gregm wrote:Skullyton85 wrote:Sweet thanks for the info!! I'm still nervous about trying it but I'll be sure and post pics if I do!!
Either pick up a NKD Nozzel just for this or grab something like a munny to practice on first.
I wouldn't paint any of my Squadts that weren't specifically for customs!
I agree with this, Everytime I see a custom squadt that isn't a Jack or Nozzel I think, that makes it that much harder for someone to get that one. Retail or not they don't make many of these.
Guess I better not post any of the other customs I have in the works.![]()
The way I see it is... whether I purchased a squadt for a custom or not it is mine and it is not going anywhere, so it is harder for someone else to get them regardless.

mazdevilz- CAD Animal Mother
- Posts: 1594
Join date: 2011-02-06
Age: 35
Location: Los Angeles
Re: Want to try first custom
Going to have to agree with maz completely on that one...we've had this discussion before on the board if a squadt is already in a collectors hands its up to them what they want to do with it, and if that's turning it into a custom by all means do so nothing should stop them from it. Its already one piece down from a run of squadts anyways if they never planned on selling it

el_payaso_loco- CAD Animal Mother
- Posts: 1659
Join date: 2010-11-02
Age: 23
Location: toronto
Re: Want to try first custom
Crunch wrote:gregm wrote:Skullyton85 wrote:Sweet thanks for the info!! I'm still nervous about trying it but I'll be sure and post pics if I do!!
Either pick up a NKD Nozzel just for this or grab something like a munny to practice on first.
I wouldn't paint any of my Squadts that weren't specifically for customs!
I agree with this, Everytime I see a custom squadt that isn't a Jack or Nozzel I think, that makes it that much harder for someone to get that one. Retail or not they don't make many of these.
theyre your toys, you can do as you please with them. I cant recall the last time I was thinking about someone else and his long trek ahead trying to find that specific toy that I was so selfishly hoarding.
that said, I do understand that some people consider the rarity of the piece a factor to keep it in their collections.
its all a matter of taste, no?

Gatiio- COLLECTOR-DESTOYER
- Posts: 2776
Join date: 2011-10-12
Age: 27
Location: Chicago

Re: Want to try first custom
I've heard this argument before. And I'm sorry but once a piece of art is sold it no longer belongs to the artist. The buyer can do whatever they please with it.

edstuff- CAD Too Buku
- Posts: 1028
Join date: 2010-11-23
Age: 36
Location: Chicago
Page 1 of 2 • 1, 2 
Similar topics» Custom cap weapons and armor?
» SCOOTERATTACK CUSTOM SWK ROAD TO PSK 2009
» Fashionable Custom Embroidery Hats For You
» NBA 2k13 My Player Custom T-Shirt
» custom torque tubes or ideas to mount a 930 transaxle
» SCOOTERATTACK CUSTOM SWK ROAD TO PSK 2009
» Fashionable Custom Embroidery Hats For You
» NBA 2k13 My Player Custom T-Shirt
» custom torque tubes or ideas to mount a 930 transaxle
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum